Trailer Tire Pressure by Load: How to Find the Correct PSI Using Load Tables

Choosing the correct trailer tire pressure involves more than checking the maximum PSI printed on the sidewall. The weight carried by each tire, its size, load range, construction and the trailer manufacturer’s recommendations all affect

Written by: khushwant483

Published on: November 15, 2026

khushwant483

November 15, 2026

Choosing the correct trailer tire pressure involves more than checking the maximum PSI printed on the sidewall. The weight carried by each tire, its size, load range, construction and the trailer manufacturer’s recommendations all affect the appropriate inflation pressure.

This matters when towing a travel trailer, boat trailer, utility trailer or car hauler. A tire carrying more weight than its inflation pressure supports can flex excessively, generate heat and suffer internal damage. Incorrect inflation can also affect tire wear and towing stability.

Trailer tire load and inflation tables help explain the relationship between tire pressure and carrying capacity. They show how much weight a particular tire can support at different cold inflation pressures.

The important part is knowing how to interpret those figures without confusing a tire’s load capacity with the pressure you should actually use on your trailer.

Why Trailer Tire Pressure Changes With Load

A tire supports its load through a combination of air pressure and its internal structure. Manufacturers establish load capacities at specific inflation pressures.

When a tire is underinflated for the weight it carries, its sidewalls flex more than intended. Repeated excessive flexing generates heat and can contribute to premature wear or structural failure.

Trailer weight distribution makes this particularly important.

Consider a tandem-axle travel trailer with four tires. It might seem reasonable to assume that each tire carries exactly one-quarter of the trailer’s axle weight. In reality, cargo placement, water tanks, appliances and storage compartments can create uneven loading.

Consequently, one tire may carry considerably more weight than another, even when the total axle weight remains within its rating.

Understanding trailer tongue weight and how it affects towing is also important because the portion of trailer weight transferred to the tow vehicle is not supported by the trailer tires.

What Is a Trailer Tire Load and Inflation Table?

A load and inflation table is a manufacturer’s reference showing how much weight a particular tire can support at different cold inflation pressures.

For example, a tire might support 2,150 pounds at 50 PSI but have a higher rated capacity at 80 PSI.

The table helps determine whether the inflation pressure provides sufficient capacity for the load being carried.

However, not every tire uses the same chart. The correct reference must match the tire’s:

  • Size and dimensions
  • Construction and application
  • Load range and load rating
  • Single or dual-wheel configuration, where applicable
  • Manufacturer specifications

An ST trailer tire chart should not automatically be substituted with an LT truck tire or passenger-car tire chart.

Example: Goodyear Endurance ST225/75R15 Load and Inflation Table

The following figures illustrate how load capacity changes with cold inflation pressure for a Goodyear Endurance ST225/75R15 tire.

Cold inflation pressureMaximum load per tire
25 PSI1,430 lbs
30 PSI1,600 lbs
35 PSI1,760 lbs
40 PSI1,880 lbs
45 PSI2,020 lbs
50 PSI2,150 lbs
55 PSI2,270 lbs
60 PSI2,380 lbs
65 PSI2,540 lbs
70 PSI2,620 lbs
75 PSI2,720 lbs
80 PSI2,830 lbs

Source: Goodyear Endurance ST tire load and inflation information. Figures apply to the specified tire and should not be treated as a universal chart for every ST225/75R15 tire.

The difference is significant. At 50 PSI, the example tire supports 2,150 pounds, compared with 2,830 pounds at 80 PSI.

Remember that the maximum load listed at a particular pressure is not permission to exceed the tire’s rated capacity. The wheel, valve stem, axle and trailer ratings must also be respected.

How to Find the Correct Trailer Tire PSI Using Load Tables

Finding an appropriate pressure requires three things:

  1. Identifying the exact tires installed on the trailer.
  2. Determining how much weight each tire carries.
  3. Checking the manufacturer’s load and inflation information alongside the trailer’s specified pressure.

Step 1: Identify Your Trailer Tire Size and Load Range

Start by examining the markings on the tire sidewall.

For example, you might see:

ST225/75R15 Load Range E

The markings identify the following:

  • ST: Special Trailer tire designation.
  • 225: Nominal section width in millimeters.
  • 75: Aspect ratio, expressed as a percentage.
  • R: Radial construction.
  • 15: Wheel diameter in inches.
  • Load Range E: Tire load-capacity classification.

Also check the maximum load and maximum cold inflation pressure printed on the sidewall.

If you’re unfamiliar with these markings, our guide to reading tire sidewall size, load index and other codes explains how to interpret the information.

Don’t assume that two tires with the same load-range letter have identical specifications. Their construction, size and maximum rated capacity can differ.

Step 2: Find the Actual Loaded Trailer Weight

The actual loaded weight is more useful than the trailer’s empty or advertised weight.

A certified vehicle scale can help establish how much weight the trailer carries when prepared for travel.

For a more accurate assessment, obtain individual wheel-position weights. At a minimum, measure the axle weights and account for the load transferred to the tow vehicle through the hitch.

Consider this example:

A loaded tandem-axle trailer has the following measurements:

MeasurementWeight
Total loaded trailer weight7,500 lbs
Weight supported by tow vehicle750 lbs
Weight remaining on trailer axles6,750 lbs
Number of trailer tires4
Average load per tire1,687.5 lbs

The average calculation is:

6,750 ÷ 4 = 1,687.5 lbs per tire

This is useful for understanding the calculation, but it does not establish the actual load on each tire.

For example, one side might carry more weight because of a refrigerator, water tank, battery installation or stored equipment.

Individual wheel-position measurements are preferable when determining the load carried by the heaviest tire.

Step 3: Find the Correct Manufacturer Load Table

After identifying the tire and measuring the load, locate the corresponding manufacturer information.

Reliable places to check include:

  • The tire manufacturer’s official website.
  • The manufacturer’s technical guides.
  • The tire’s product documentation.
  • The trailer manufacturer’s owner’s manual.
  • The trailer certification and tire information placard.

For example, Goodyear publishes load and inflation information for its Endurance ST tires. Other manufacturers, including Hankook, also provide tire maintenance and inflation guidance.

Make sure the information matches your exact tire specification. A chart for a different tire size, load range or application may produce an incorrect result.

Step 4: Match the Tire Load to the Inflation Table

Let’s return to the example of a tire carrying an estimated 1,687.5 pounds.

Using the Goodyear ST225/75R15 example table:

Cold pressureMaximum loadDoes it support 1,687.5 lbs?
30 PSI1,600 lbsNo
35 PSI1,760 lbsYes
40 PSI1,880 lbsYes
45 PSI2,020 lbsYes

The first listed pressure that supports the calculated load is 35 PSI.

However, 35 PSI is a mathematical result from this example, not an automatic inflation recommendation for your trailer.

This distinction is important.

A load table tells you how much weight a tire can support at a particular pressure. It does not automatically override the trailer manufacturer’s specified cold inflation pressure.

Some trailer tire manufacturers recommend maintaining the pressure stated on the trailer placard, commonly the tire’s maximum rated cold pressure. Others provide specific load-based inflation guidance.

Before reducing pressure below the placard specification, confirm that the tire and trailer manufacturers explicitly permit that adjustment.

If the required pressure exceeds the tire’s permitted pressure or its load capacity is insufficient, the solution is to address the loading or equipment specification, not to exceed the tire’s rating.

Step 5: Check the Wheel and Valve Pressure Ratings

The tire is only one part of the assembly.

The wheel and valve stem must also be rated for the intended pressure and load.

This becomes particularly important when replacing existing tires with a higher-load-range model.

A replacement tire with a higher load rating does not automatically increase the capacity of:

  • The trailer axle
  • The wheel and hub
  • The suspension
  • The trailer frame
  • The complete trailer’s GVWR

Check these specifications before changing tire sizes, load ranges or inflation pressures.

Understanding what GVWR means and how it limits vehicle weight helps put tire capacity into the larger picture of safe loading.

Trailer Tire Pressure: Differences Between Load Range C, D and E

Load range identifies a tire’s load-capacity classification. It does not tell you the exact pressure required under every loading condition.

The following are common maximum cold inflation pressure examples for many ST tire designs:

Load rangeCommon maximum cold pressure
C50 PSI
D65 PSI
E80 PSI
F95 PSI
G110 PSI

These are reference examples, not universal specifications. Actual maximum pressure depends on the tire’s design and manufacturer documentation.

A higher load range generally provides a greater maximum load capacity in a compatible tire size. However, it does not mean you should automatically inflate every replacement tire to the highest pressure associated with its load range.

Always check the actual sidewall markings and manufacturer’s instructions.

When Should You Check Trailer Tire Pressure?

Trailer tire pressure should be measured when the tires are cold.

Ideally, check them before driving, after the trailer has been parked for several hours. Goodyear recommends checking before trips and at least monthly.

As tires warm up during travel, their internal air pressure naturally increases. This is normal.

Never release air from a warm tire simply to bring the reading back to the recommended cold PSI. Doing so can leave the tire underinflated after it cools.

A sensible inspection routine includes:

  • Checking pressure before every long trip.
  • Checking at least once a month, even when the trailer is parked.
  • Rechecking after significant temperature changes.
  • Inspecting pressure after replacing tires or wheels.
  • Investigating any tire that repeatedly loses pressure.

Use an accurate pressure gauge with a suitable PSI range.

A tire pressure monitoring system (TPMS) can provide additional information while towing, but it does not replace checking cold inflation pressure manually.

Common Trailer Tire Pressure Mistakes to Avoid

Several common mistakes can lead to incorrect trailer tire inflation.

Using the wrong load table: A chart for another tire size, construction or manufacturer may give misleading results.

Ignoring uneven weight distribution: Dividing total axle weight equally between the tires produces an average, not the actual load on each tire.

Confusing maximum PSI with recommended pressure: The sidewall maximum and trailer placard serve different purposes. Follow the applicable manufacturer instructions.

Checking pressure only when tires are hot: Warm readings cannot be compared directly with cold inflation specifications.

Assuming more air increases the rated load: Inflation cannot increase a tire’s published maximum load rating or the trailer’s axle and GVWR limits.

Ignoring inside tires on dual-wheel setups: Inner tires can be harder to inspect and may experience different heat and airflow conditions. Check them as carefully as the outer tires.

Ignoring trailer weight distribution: Poorly distributed cargo can increase the load on individual tires and affect towing behavior. It can also contribute to handling problems such as trailer sway.

Frequently Asked Questions

Should trailer tires always be inflated to maximum PSI?

Many ST trailer tire manufacturers recommend using the cold inflation pressure specified on the trailer’s tire placard, which commonly corresponds to the tire’s maximum rated pressure. Follow the instructions for your specific trailer and tires. Do not assume a lower pressure from a load table is acceptable without confirming that load-based adjustments are permitted.

How do I calculate trailer tire PSI by weight?

Determine the actual load carried by each tire, locate the matching manufacturer’s load and inflation table, and identify the pressure that supports that load. Then verify that the pressure complies with the trailer manufacturer’s recommendations and the limits of the tire, wheel and valve stem.

Does a higher load range require more PSI?

A higher load range generally allows a compatible tire to carry more weight at its specified maximum inflation pressure. However, the appropriate operating pressure depends on the tire’s specifications, actual load and manufacturer instructions.

What happens if trailer tires are underinflated?

Underinflated tires flex more than intended, generating additional heat. Continued operation can contribute to excessive tread wear, internal structural damage and tire failure.

Can I use a truck tire load table for trailer tires?

Not automatically. ST trailer tires, LT light-truck tires and passenger tires have different specifications and applications. Use the load and inflation information published for the exact tire type and size installed on your trailer.

Should I lower trailer tire pressure when the trailer is empty?

Not without checking the manufacturer’s guidance. Some trailer tire manufacturers specify the placard pressure regardless of whether the trailer is lightly loaded. A load-table adjustment should only be made when explicitly permitted for the particular tire and trailer combination.

How often should I check trailer tire pressure?

Check it at least monthly and before every long trip. Checking before each day of travel is an additional precaution, particularly when towing a heavily loaded trailer.

Conclusion

Finding the correct trailer tire pressure by load requires more than dividing the trailer’s weight by its number of tires. You need the exact tire specifications, reliable weight measurements and the manufacturer’s load and inflation information.

Load tables are useful because they show how tire carrying capacity changes with inflation pressure. However, they must be interpreted alongside the trailer’s tire placard, owner’s manual and the ratings of the complete wheel and axle assembly.

Start with the manufacturer’s recommended cold pressure. If you are considering a lower pressure based on actual loading or upgrading to a different tire load range, verify that the complete setup supports the change.

A few minutes spent checking tire pressure and weight distribution before a trip can help protect your tires, trailer and the equipment you’re towing.

Leave a Comment

Previous

How to Weigh a Truck and Trailer at a CAT Scale: A Step-by-Step Guide

Next

ST vs. LT Tires for Trailers: Which Is Better and Can You Switch?